This page was formatted as a printer friendly page.

DPP Series RF Push-Pull Plug

Please contact Customer Service if you require additional information after reading this page.

Electrical Impedance 50 OHMS Frequency Range 0 – 11 GHz Working Voltage 1000 VRMS @ Sea Level VSWR        Straight Plug 1.2 max. 0 – 11 GHz      Right Angle Plug 1.25 max. 0 – 11 GHz Dielectric Withstanding Voltage 2,500 volts VRMS Insulation Resistance 5,000 M Ω minimum Center Contact Resistance 1.0 m Ω Outer Contact Resistance 0.2 m Ω RF Leakage -90 dB minimum at 3 GHz Insertion Loss .15 dB maximum at 10 GHz   Material Pin (Male) Contacts Brass, Plated Gold over  Nickel Body Brass, Nickel Finish Other Metal Parts Brass, Nickel Finish Insulators TFE Interfacial Seal EPDM Elastomer Crimp Ferrule Brass, Nickel Finish Molded Shell Components PEI Thermoplastic   Environmental Temperature Range -400 F to + 2570 F Vibration Mil-STD-202, Method 204, test condition B Moisture Resistance MIL-STD-202, method 106 Corrosion Mil-STD-202, Method 101, test condition B Temperature Cycling Mil-STD-202, Method 102, test condition C   Mechanical Mating 5/8 – Push-Pull/Threaded Coupling Braid or Jacket Attachment Hex Braid Crimp Center Contact Attachment Crimp or Solder Cable Retention Crimps 60 – 120 Lbs.     Intermateability Mates with all N connector receptacles that conform to Mil-C-39012   Envelope Conforms to physical space requirements of Mil-C-39012   *Note: These characteristics are typical but may not apply to all connectors in this series. For specific performance criteria contact the factory for current envelope drawings and specifications and or test data.