This page was formatted as a printer friendly page.

59000/60000 Threaded Composite Series

Please contact Customer Service if you require additional information after reading this page.

Material Specifications

Plug
Shell: Thermoplastic
Insert: Retainer-Thermoplastic
Grommet-Silicone Elastomer
 

Receptacle
Shell: Thermoplastic
Insert: Retainer-Thermoplastic
Grommet-Silicone Elastomer
 

Contacts
Pin: Copper Alloy
Socket: Copper Alloy
Finish: Gold Plated

General  Specifications

Insulation Resistance:

1000 megohms minimum at 25 C.
Dielectric Withstanding Voltage:
1500 Volts ac (rms) at Sea Level.

Working Temperatures:
-55 C to +150 C.

Vibration:
Properly wired and mated connector assemblies will withstand  4 hours of 20g peak sinusoidal vibration in both radial &  axial directions without loss of electrical continuity in excess of one microsecond.
 

Durability:
No electrical or mechanical defects after 500 cycles of engagements  and disengagements.
 

Corrosion:
Composite connectors exceed 2000 hours salt spray.

Humidity:
Properly wired and mated assemblies will withstand 10 days of 98% relative humidity while undergoing temperature cycling  between +25 C and +65 C without loss of electrical qualities or  leakage.

Altitute Immersion:
Properly wired, overmolded, and mated cable assemblies, when cycled 3 times from sea level to 50,000 feet while immersed in  a salt water solution, will exhibit no loss of electrical properties or leakage.

Water Immersion:
Properly wired and mated connector assemblies will withstand  immersion under 4 feet of water for 24 hours w/o loss of electrical qualities or leakage.

EMI Shielding Effectiveness:
50 db minimum - 100Mhz to 10Ghz.

Silicone Insert:
Front and rear silicone inserts are devoid of all organic matter.

Working Voltage Size 22 contact 750 Volts ac (rms) Size 20 contact 1000 Volts ac (rms) Size 16 contact 1000 Volts ac (rms) Size 12 contact 1000 Volts ac (rms) Contact Retention In either direction, contact displacement less than .012” Size 22 contact 8 lbs min. Size 20 contact 10 lbs. min. Size 16 contact 15 lbs. min. Size 12 contact 20 lbs. min. Current Rating Size 22 contact 5.0 amps Size 20 contact 7.5  amps Size 16 contact 13.0 amps Size 12 contact 20.0 amps Contact Insertion/Removal Force Size 22 contact 10 lbs. max Size 20 contact 20 lbs. max. Size 16 contact 20 lbs. max Size 12 contact 30 lbs. max Usable Wire Size Size 22 contact .030” to .054” O.D. Size 20 contact .040"  to .083" O.D. Size 16 contact .085"  to .109" O.D. Size 12 contact .097” to .142” O.D. Coupling Torque Shell Size Max./Min. (in.-lb.) 09 8/1 11 12/1 13 16/2 15 20/3 17 24/3 19 28/3 21 32/4 23 36/4 25 40/4 Connector Materials: UL Flammability Rating Shell Size  Max./Min. (in.-lb.) Insert and Shell Components 94 V-O Elastomer  Wire Seals 94 HB